DENO LED Lighting

Bandeaux LED B2B — Fabricant d'éclairage DENO®

Le hub produits de DENO couvre huit séries professionnelles de rubans LED et d'éclairages linéaires conçues pour les projets B2B : SMD (1 SDCM, Dim-to-Warm, 48V, Marine, Automobile), SOB sans points, COB chip-on-board, Neon Flex (moulé par injection, 360°, mini), Wall Washer, Panneaux LED FlexLite, Barres lumineuses linéaires et Profilés aluminium. Toutes les séries partagent une FPCB en cuivre à 99.9 %, une tolérance de ±5μm et une certification CE / UL / RoHS.

How to choose a DENO LED strip series

DENO manufactures every series listed above in-house on an electroplated Roll-to-Roll FPCB line carrying up to 105 μm of copper, or thicker on request, so the selection question is rarely about supply and almost always about optics, wattage and run length. SMD LED strips remain the workhorse for cove lighting and general architectural detailing: discrete emitters in 2216, 2835, 3014 or 5050 packages, 8 mm to 20 mm PCB widths, and cut units from 12.5 mm upward. SOB (Solder-on-Board) strips solder individually encapsulated, gold-wire-bonded packages onto the flexible circuit and coat them as one continuous line, which removes visible dots while carrying more power than conventional COB tape — the right answer for grazing angles, shallow coves and diffusers under 15 mm. COB LED strips give the same dot-free line at a lower price point, while Neon LED strips wrap the emitter in extruded silicone for IP67/IP68 outdoor signage, handrails and facade contours.

Power and voltage decide the rest. A 24 V strip typically runs 5 m from a single feed before the far end drops below tolerance; 36 V and 48 V constant-current builds extend that to 15 m and up to 50 m respectively, and DENO's doubled copper cross-section halves the voltage drop again at any given wattage. For colour-critical retail, museum and studio work, choose a Full Spectrum grade at CRI 95+ with SDCM ≤3; for offices and corridors, a high-efficiency grade up to 200 lm/W keeps ErP energy class and installed load down. Aluminum profiles, power supplies, dimmers and controllers in the directory above complete the system, and every combination can be verified numerically in the ProCalc engineering suite before you request a quotation.

Every series page below lists real models with measured lumen output, wattage per metre, cut unit, PCB width and copper thickness. Sample orders, OEM private labelling and full ODM development are available on all of them.

LED strip product series & sub-series